Vlastnosti a použitie amerického bieleho duba a červeného duba

Oak is one of the most popular hardwoods for woodworking and flooring. It’s strong and attractive, especially when properly finished. There are many species of oak, and lumber from them is sold in two groups, white oak and red oak. Here’s what woodworkers should know about each. (For more on oak’s history and uses, see the legacy of oak.)

American white oak and red oak have some qualities in common:

• Keep your tools sharp and run router bits at appropriate speeds to help prevent burn marks. If burns do happen, you can usually sand them out.
• Oak is hard. Its Janka hardness is commonly listed at about 1,290 pounds-force for northern red oak and 1,360 for white oak.
• Oak is rich in tannins. For centuries, animal hides were tanned using tannins from oak bark.
• Oak can split or chip when routing along the edges because of its pronounced grain, so work patiently.
• Oak’s grain is one of its best qualities, so many woodworkers choose finishes that show it off. Sanding with progressively finer grits gives the best results.
• A pinless merač vlhkosti dreva lets you check that your oak has the right moisture content before you build, without leaving pin holes.

Biely dub

White oak resists water well. The pores in its heartwood are usually plugged with tyloses, growths that tend to make the wood impenetrable to liquids. That’s why white oak is the traditional choice for tight cooperage, barrels made to hold liquids. Its heartwood also has good decay resistance, so it’s used for boat planking and bent parts of boats, as well as outdoor furniture.

White oak is fairly straight-grained and is a favorite for fine furniture and flooring. It’s often sold quartersawn, which shows off a striking ray fleck pattern.

White oak’s color varies. Boards may be light to dark brown, sometimes with yellow or gray tones. Stain and finish bring out its appearance.

Red Oak

Red oak is widely available, including at most home centers. Many of its uses overlap with white oak’s, but its open pores make it unsuitable for tight cooperage unless the barrels are lined. According to the USDA Forest Service Príručka o dreve, red oak is used for:

• Podlaha
• nábytok
• dyha
• Railroad ties, mine timbers, and fence posts (with preservative treatment)
• Vláknina
• Krabica
• Palety a prepravky
• skrinky
• Všeobecné truhlárske práce
• Drevený riad
• Kľuky

Bezplatné stiahnutie – Je pre vás najlepší vlhkomer s kolíkom alebo bez kolíka?

Red oak has open pores and fairly high shrinkage as it dries, though white oak actually shrinks slightly more. Compared to birch or maple, red oak takes stain easily and is less prone to blotching. Because its open pores absorb stain, the grain pattern stands out when a dark stain is used.

Red oak doesn’t have white oak’s water resistance, since water can enter its open pores more easily. And because oak is rich in tannins, wet oak that contacts iron, such as steel fasteners or steel wool, can develop blue-black stains. If you have red oak flooring, be especially careful not to expose it to standing water.

Vlhkomery Orion

Ron Smith

Ako obchodný manažér spoločnosti Wagner Meters má Ron viac ako 35 rokov skúseností s prístrojovou technikou a meracími systémami v rôznych odvetviach. V predchádzajúcich pozíciách pôsobil ako regionálny obchodný manažér, produktový a projektový manažér a obchodný manažér pre výrobcov zaoberajúcich sa meracími prístrojmi.

Posledná aktualizácia 8. októbra 2026